Loading ...
Loading ...
Loading ...
10
INSTALLATION
The installation must be performed by a qualified electrical contractor. This contractor will take
the entire responsibility of the installation. The installation has to comply with the legislation and
the standards in force in your country.
How to stick the gasket:
The gasket supplied with the cooktop prevents the intrusion of liquids into the cabinet below.
Its installation has to be done carefully, as described below.
Fitting - installing:
• Cut out sizes of the worktop:
Reference
Cut-size
BCC64T / BCC604TB
560 x 490 mm
• Ensure that there is a distance of 50 mm between the cooktop and the wall or sides.
• The hobs are classified as “Y” class for heat protection. Ideally the cooktop should be
installed with plenty
of space on either side. There may be a wall at the rear and tall units
or a wall at one side. On the other side, however, no unit or divider must stand
higher than the cooktop.
• The piece of furniture or the support in which the cooktop is to be fitted, as well as the
edges of furniture, the laminate coatings and the glue used to fix them, must be able
to resist temperatures of up to 75 °C.
• The mural rods of edge must be heat-resisting.
• If the cooktop is installed above another appliance, ensure there is a 20mm gap to allow
for air ventilation.
• Ensure a gap of 20mm is left below the cooktop when installed for circulation.
• Do not store flammable material below the cooktop.
• Ensure gasket is correctly fitted before installing cooktop, failure to do so could lead to
damage of the benchtop.
• The safety gap between the cooktop and the cooker hood placed above must respect
the indications of the hood manufacturer. In case of absence of instructions respect a
distance minimum of 650 mm.
• The connection cord should not be subjected, after building-in, to any mechanical
constraint (for instance constraint given by a drawer installed below).
• WARNING: Use only cooktop guards designed by the manufacturer of the cooking
appliance or indicated by the manufacturer of the appliance in the instructions for use as
suitable or cooktop guards incorporated in the appliance. The use of inappropriate
guards can cause accidents.
Stick the gasket (2) two millimeters
from the external edge of the glass,
after removing the protection tape (3).
Loading ...
Loading ...