Loading ...
Loading ...
Loading ...
36
FAULT CODES
PROBLEM POSSIBLE CAUSE WHAT TO DO
A20
Drain fault
Drain hose is
crimped or bent.
Check the drain hose and straighten if needed.
Blocked drain
connection.
Check that drain connection is free from blockages.
The waste water is
not draining out.
Ensure that the drain hose is connected in accordance
with the installation instructions.
The turbidity
sensor is dirty and
requires cleaning.
Gently clean the turbidity sensor with a soft brush
(ie toothbrush) to remove any buildup.
Turbidity
sensor
Drain pump
is blocked.
Remove the drain filter and clear any water from
the drain.
Remove the sump insert and pump cover.
Remove any remnants of food or blockages from
the pump.
Take care in case sharp objects or fragments of glass
are blocking it, as these may cause injury.
Pump
cover Sump
insert
A10
No water
Water tap not
turned on.
Ensure the water is connected and turned on.
Touch to restart the dishwasher.
Insufficient water
supply pressure.
Check household water pressure.
Water inlet hose is
crimped or bent, so
no or not enough
water gets to
the dishwasher.
Check the water inlet hose and
straighten if needed. Touch to restart
the dishwasher.
Drain hose is not
connected correctly.
Ensure that the drain hose is connected in accordance
with the installation instructions.
'A' fault codes
Follow the steps below to try and fix the issue.
Loading ...
Loading ...
Loading ...