Loading ...
Loading ...
Loading ...
33
PROBLEM POSSIBLE CAUSE WHAT TO DO
Plastic
items are
discoloured
(e.g. stain left
by tomato
sauce)
Not enough detergent,
not pre-rinsed.
Pre-rinse plastic dishes before
placing in the dishwasher and/or add
more detergent.
Alternatively, using the Rinse
program after adding dishes may
minimise staining.
Display
flashing while
Keylock is on
This is normal. The display
remains on although the
buttons are disabled.
No action required.
White stains
are left
on dishes;
glasses
have a milky
appearance
Not enough detergent. Refer to 'Detergent' for recommended
quantities. You may need to adjust these
to suit the hardness of your water supply.
Rinse aid dosage too low. Increase rinse aid dosage.
Refer to 'Rinse aid'.
Dishes,
cutlery have
not dried
Rinse aid dosage too low. Increase rinse aid dosage.
Refer to 'Rinse aid'.
Items removed too soon. After the end of the wash program, leave
the door ajar and wait for several minutes
to help drying.
Rinse aid dispenser empty.
(The rinse aid indicators
are lit.)
Add rinse aid. Refer to 'Rinse aid'.
Glasses
have dull
appearance
Rinse aid dosage too low. Increase rinse aid dosage.
Refer to 'Rinse aid'.
Tea stains
or traces of
lipstick have
not been
completely
removed
Not enough detergent. See section 'Detergent' for recommended
quantities. You may need to adjust these
to suit your particular load.
Wash temperature too low. Select a wash program for heavily
soiled dishes. Refer to 'Wash programs'
for information.
Traces of rust
on cutlery
Cutlery is not
sufficiently rustproof.
Wash by hand.
Glasses
clouded and
discoloured;
milky coating
Hard water situation. Increase detergent quantities.
Glasses are not
dishwasher proof.
Wash by hand.
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...