Loading ...
Loading ...
Loading ...
WARNING
• If the parts have damage, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
9.2 INSTALL THE TUBE
5
6
1. Move the tube until the tube release button (5) engages
into the slot (6).
9.3 CONNECT THE POWER CORD
1. Attach the extension cable to the motor housing with the
cord retainer. This prevents accidental removal of the
electrical cable.
2. Connect the female end of the electrical cable into the
receptacle behind the unit.
10 OPERATION
WARNING
Make sure the blower tube is in position before operation.
10.1 START THE MACHINE
This machine is equipped with a three-way (OFF/ LOW/
HIGH) switch.
1. Push the on/off button forward to reach the low speed.
2. Push the on/off button forward twice to reach the high
speed.
B
A
IMPORTANT
While in mulching mode, the machine must be in high
speed position.
10.2 STOP THE MACHINE
1. Pull back the on/off button to the off position.
10.3 OPERATION TIPS
• Blow around the outer edge of the unwanted materials to
prevent the unwanted materials from scattering.
• Use rakes and brooms to clear the unwanted material
before you blow.
• Make the surfaces wet before you clear the unwanted
material in dusty conditions.
• Look out for children, pets, open windows, and cleaned
cars during operation.
• Clean the machine.
• Discard the unwanted material when you complete work.
10.4 OPERATE AS A BLOWER
1. Hold the machine tightly.
2. Operate from side to side.
3. Move the machine forward slowly.
4. Keep the collected unwanted materials in front of you.
7
English
EN
Loading ...
Loading ...
Loading ...