Loading ...
Loading ...
Loading ...
— 17 —
Maintenance
Cleaning Filters
IMPORTANT: Drain oil from baffles, spacers, filters, oil tunnels, oil containers before oil and residue overflow!
• Removeallbafes,spacers,lters,greasetray,andoilcontainersanddiscardoilandresidue.
• Washwithwarmsoapywater.NOTE:Stainlesssteelbafes,spacersandoiltunnelaretoprackdishwashersafe.
• Dry thoroughly before replacing and follow directions for installation in reverse.
• Filters should be cleaned after every 30 hours of use.
• Should lters wear out due to age and prolonged use, replace with a new lter.
u
Make sure the range hood is unplugged or turn OFF
breaker.
v
Remove lters. Reach into interior of range hood
until reaching clip located on the side of the light.
Gentlysqueezeandpushdownuntillightpopsout
from its location, pull out the LED light and unplug it.
CAUTION: LIGHT MAY BE HOT, PLEASE TAKE
OUT THE LIGHT WHEN THE LIGHT IS
COMPLETELY COOL!
w
Replace with appropriate LED light. Please contact
Ancona customer service for replacement. Plug in
new light and push back into light panel.
x
Turn ON breaker and range hood to test for
operation.
Replacing the Light
IMPORTANT:
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY AT THE MAIN PANEL BEFORE CARRYING OUT ANY OPERATION
ON THE APPLIANCE.
Figure 12
Cleaning Oil Cup
• Remove the oil cup, by slightly pulling the oil cup forwards to release it from the range hood.
• Discard the oil before cleaning/washing the cup.
• Ensure the cup has been cleaned and dried before reattaching to the hood.
Figure 11
Loading ...
Loading ...
Loading ...