Ancona AN-17034SS User Manual and Installation Instructions

Loading ...

— 13 —

Installation

STEP 10

Mount Range Hood onto Wall

• Hang the range hood on the hooks of the hood mounting

bracket (see Figure 4).

• Screw the range hood to the wall.

CAUTION - Make certain the range hood is secure

before releasing!

STEP 11

Connect Ductwork

• Attach ductwork to damper. Secure the ductwork with duct tape to make sure joints are secure and air- tight.

• Donotinstalltheducttapetootightlyasthismaypreventthedamperapsfromopeningwhichwilloverworkthemotor

and cause improper functioning of the unit.

• Fasten all connections with sheet metal screws and tape all joints with certied aluminum or foil tape. Use caulking to

seal exterior wall or roof opening around the cap.

STEP 9

Venting

• Fixthedamperaponthetopventofthehood(seeFigure3).

• If ventilation system is equipped with an external air duct with a

different diameter, apply a reduction tting. However, for maximum

performance and safety, a 6 in. round ducting is recommended.

STEP 12

Plug-in

• Connect3-pronggroundedplugintoa3-pronggroundedoutlet(120V,60Hz).Placetheoutletatamaximumdistance

of 33-1/2 in. (851 mm) from where the cord exits on the hood.

• SEE IMPORTANT INSTRUCTIONS ON NEXT PAGE.

3-Pronged Plug

Ground Plug

3-Prong Outlet

Figure 3

Figure 4

Loading ...

Ancona AN-17034SS 30" 600 CFM Ducted Wall Mount Pyramid Range Hood in Stainless Steel