Loading ...
Loading ...
Loading ...
13
www.spirittness.com
CE850 STEP ONE
HARDWARE FOR STEP 1
PART TYPE DESCRIPTION QTY
137 HEX HEAD BOLT
3/8” X 2-1/4”
2
139 HEX HEAD BOLT
3/8” X 3-3/4”
4
145 SOCKET HEAD CAP BOLT
3/8”X3/4”
4
150 SCREW
M5X10
4
176 FLAT WASHER
3/8”X19X1.5T
6
186 SPRING WASHER
3/8”X2T
4
187 CURVED WASHERS
3/8” X 23 X 2T
4
1. Place 2 Flat Washers (No.176) against 2
Hex Head Bolts (No.137) and hand-tighten them
through the top of the Rear Stabilizer Tube (Main
Frame), into the Rear Rail Assembly (No.2) by
using the Wrench (No.194).
2. Place 4 Curved Washers (No.187) against 4
Hex Head Bolts (No.139) and hand-tighten them
through the Front of the Rear Stabilizer Tube, into
the Rear Rail Assembly (No.2) by using Wrench
(No.194).
3. Pierce 14P Computer Cable (No.68) from
bottom of the console mast tube through it and
pull out of the top. Use 4 Socket Head Cap Bolts
(No.145), 4 Spring Washers (No.186) and 4
Flat Washers (No.176) to secure.
4. Untie the Computer Cable (No.68) , connect 2 Handpulse W/Cable Assembly (No.58) and Handle Wire
(Upper), Resistance/ Incline (White/Red) (No.61/62) with the Console Assembly (No.55) respectively. Then
place the Console on top of the Mast and use Phillips Head Screw Driver (No.192) to tighten 4 Phillips Head
Screws (No.150) to secure.
Loading ...
Loading ...
Loading ...