Loading ...
Loading ...
Loading ...
8
ENGLISH
FRONT PANEL FUNCTIONS
[13] MONITOR SECTION
In this panel are present four knobs; PFL LEVEL control the level of PFL bus. PFL signal can be listened
through CONTROL ROOM when two speakers are connected to CTRL ROOM OUTPUT jacks (see section
40 on rear panel description) or through HEADPHONE OUTPUT (see section 15). Both CONTROL ROOM
and HEADPHONE OUTPUT are provided with individual level control. CONTROL ROOM level knob: level
control of the signal routed to CTRL ROOM OUTPUT. During the normal use of the mixer the MAIN
MIX signal is routed to this output; when one or more PFL button are pressed the PFL bus signal will
be routed to CTRL ROOM OUTPUT and HEADPHONES OUTPUT. HEADPHONES LEVEL control the level
of the signal sent to the HEADPHONES OUTPUT; set this control to minimum (-∞) before connect and
wear headphones to avoid hearing loss. 2TRACK/USB INPUT control the level of the signal present on
the 2TRK IN RCA connector (see section 33 of rear panel description) and the signal coming from a
computer connected to the USB port (see section 32 of the rear panel description).
[14] CUE ACTIVE LED
This led light up when one or more PFL button are pressed.
[15] HEADPHONES OUTPUT
Connect here a headphones to listen MAIN MIX or PFL signals
[16] AUX SENDS 1 TO 4
Each channel of E24 mixer is provided with 6 auxiliaries sends; the AUX SENDS 1 to 4 are pre fader
sends. The signal of AUXes 1 to 4 are routed to the AUX1 to AUX4 OUTPUTS XLR present on rear panel
(see section 34 on rear panel description).
[17] AUX SENDS 5
AUX 5 is a selectable pre-fader/post-fader auxiliary send; it is possible to select the pre/post position
pressing the pre/post button (see section 21) positioned close the AUX 5 MASTER potentiometer (see
section 21). When the selection is pre-fader AUX 5 takes the signal from the channel independently
from the fader position; when the selection is post-fader the AUX 5 take the signal subjected to the
fader position.
[18] AUX SENDS 6/FX
AUX SEND 6 is a post-fader auxiliary send. This aux feeds the internal Z.CORE DSP FX but in some case
can be used as further auxiliary send for monitor purpose.
[19] FX TO AUX
These sends allow to route the signal present in the FX return channel to the AUX sends.
[20] AUX MASTER SECTION
These potentiometers control the general level of the single AUX SENDS from 1 to 6. The PFL button
when pressed allow to listen the signal present in the single aux sends through speakers connected
to the CTRL ROOM OUTPUT (see section 40 of the rear panel description) or through headphones
connected to HEADPHONES OUTPUT (see section 15).
[21] AUX 5 PRE/POST BUTTON
This button allow to select the AUX 5 position, pre-fader or post-fader; (see section 17)
[22] PAN
These controls allow to position the signal present in the mono channel in the stereo image of the
stereo MAIN MIX or BUS OUT.
Loading ...
Loading ...
Loading ...