Comica LINKFLEX AD5 User Manual

Loading ...

4. Inst Switch 1/2

Turn on/o the input impedance. Please turn the inst switch on when connecting Hi-Z instruments such as an electric guitar/bass to achieve better input

eects.

1. It's recommended to set the gain of AD5 to the minimum before turning on/o Inst switch to avoid feedback problems and damage to the devices.

2. When connecting devices not requiring high inpedance to IN1/2 port, please make sure to turn o Inst switch.

3. To protect your speaker system, leave the monitor speakers turned o when turning the Inst switch on/o.

5. 3.5mm Monitoring Port 1

Plug in 3.5mm TRS/TRRS headphones to monitor.

6. Monitoring Mode Switch

Turn on/o Direct monitoring mode. In direct monitoring mode, AD5 will route the audio signals from IN1/2 directly to the monitor outputs and headphones with

zero latency. In input monitoring mode, audio signals from IN1/2 will be routed to the DAW software and then to the monitor outputs and headphones with

mixed audio, which will cause a delay in monitoring.

7. Loopback Switch

Loopback uses the 'virtual' inputs, which have no physical connectors on the audio interface itself but can directly route the digital signal streams back to

DAW software, it can capture all the audio signals from your computer(e.g., the audio signal output from a web browser) to input to the audio interface.

Short press to turn on/of Loopback. When Loopback is on, AD5 will output audio signals both from IN1/2 and USB-C ports; When Loopback is o, AD5 will

output audio signals from IN1/2 ports.

8. Monitoring Volume Control Knob

Adjust the volume level of the monitoring port1/2.

Loopback only aects the audio output of the USB-C port, not the 3.5mm port.

Loading ...

Comica LINKFLEX AD5 Audio Portable 4x4 Dual USB-C Audio Interface for Computer and Phone/Tablet

User Manual - Page 7