Loading ...
Loading ...
Loading ...
5
ASSEMBLY INSTRUCTIONS
1
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
DANGER: Failure to disconnect the power supply prior to
installation may result in serious injury or death.
3
2. Tighten the two set screws. Then remove the
mounting bracket by removing the two mounting
bracket screws from the round holes in the canopy.
Finally, loosen the other two mounting bracket screws
from the J-shaped slots. Lower the canopy and remove
mounting bracket.
3. Install the mounting bracket to the outlet box (not
included) using the screws and washers provided with
the outlet box.
WARNING: To reduce the risk of re electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting
screws and washers provided with the outlet box.
Mounting
Bracket Screw
Mounting
Bracket
2
4. Remove the paper and rubberband from the downrod.
Then, lift the downrod into the mounting bracket. Rotate
the downrod until the tab in the mounting bracket is
seated in the slot in the downrod ball.
WARNING: The fan and/or downrod should not rotate in
the mounting bracket if installed correctly. Failure to align
the slot in the downrod ball with the tab may result in fan
falling causing serious injury or death.
Tab
Slot
Downrod
Mounting
Bracket
4
Set Screw
Loading ...
Loading ...
Loading ...