Loading ...
Loading ...
3
4. INSTALL JUNCTION BOX
981,76
Install the junction box by engaging the tabs of the
junction box with the slots on the control housing,
align the screw hole at the top and drive the supplied
screw until secure.
6. INSTALL JUNCTION BOX
COVER
1. Replace and secure all front covers on the sub
base. Do not pinch any wires.
2. Place the junction box cover in place. Replace the
two screws removed earlier and tighten securely.
3. Replace the Zoneline front cabinet.
5. CONNECT THE CORDSET
Plug in the connectors on the power supply kit into the
corresponding mating connectors on the Zoneline. Be
sure to locking tabs at the sides are engaged.
Insert the plug into the receptacle inside the subbase.
NOTE: Power Supply Kit – Appearance may vary
RAK315SP will only have one power connector.
Installation Instructions
ZONELINE SERIES – POWER SUPPLY KIT
Slots on
Control
Housing
Tabs on
Junction
Box
15A 20A and 30A
Loading ...
Loading ...
Loading ...