Loading ...
Loading ...
Loading ...
Installation
To protect property and refrigerator from damage,
observe the following:
Protect vinyl or other flooring with cardboard, rugs,
or other protective material
Do not use power tools when performing leveling
procedure.
To enhance the appearance and maintain performance,
the refrigerator should be level.
Note
• Complete any required door reversal, panel
installation and/or a water supply connection,
before leveling.
Materials Needed
• %"hex head driver
• Carpenter's level
1. Remove toe grille.
• Grasp firmly and pull outward to unclip.
i
!
i
J
2. Remove bottom hinge cover(s).
• Place the eraser end of a pencil or similar blunt
tool in the cover notch.
Notch
• Use slight pressure to pry the cover loose.
• Continue to maintain downward pressure to the
notched side of the cover while swinging it off.
3. Using hex head driver, turn the front adjustment
screws (A) on each side to raise or lower the front
of the refrigerator.
B B
Using the carpenter's level, make sure front of
refrigerator is Y4"(6 ram) or Y2bubble higher than
back of refrigerator and that the refrigerator is level
from side to side.
Turn stabilizing legs (B) clockwise until firmly
against floor.
Replace hinge cover(s).
• Position cover into the outer edge of the hinge.
• Swing the cover toward the cabinet and snap it
into place.
7. Replace the toe grille.
Note
• For proper reinstallation, ensure the "top" marking
on the interior of the toe grille is oriented correctly.
• Align the toe grille mounting clips with the lower
cabinet slots.
• Push the toe grille firmly until it snaps into place.
Loading ...
Loading ...
Loading ...