Loading ...
Loading ...
Loading ...
Installation
Reinstallation of the Door
1. Install hinge assemblies:
• Install top hinge loosely with 5/,,, hex head
sorews.
• Install center hinge with Phillips screws.
• Install bottom hinge with 3/8"hex head screws.
2. Insert bottom hinge pin.
• Locate bottom hinge hole closest to
outside edge of cabinet, and insert
bottom hinge pin. Replace any door
shims, if present.
3. Place hinge side of freezer door on
.
.
bottom hinge pin and hold freezer
door upright while installing center
hinge pin with %_"hex head driver.
• Replace any applicable door shims.
• Make sure the hinge pin is installed tightly.
Place hinge side of refrigerator
door on center hinge pin.
While holding refrigerator door
upright, tighten down top hinge
with _/,8"hex head driver and
replace hinge cover.
Door Reversal
In some installations, reversing the door swing allows
for more convenient access to stored items. Both
doors can be reversed.
1. Remove door(s) (see page 9).
2. Transfer cabinet plugs and cabinet screws to
opposite side of cabinet.
• Remove cabinet plugs with flat
blade of screwdriver tip wrapped
in masking tape.
• Remove center mullion screws
with 5/,,, hex head screwdriver.
• Remove bottom mullion screws
with 3/;, hex head driver.
To avoid possible injury and damage to property:
• Place doors on a nonabrasive surface protected by
towels or rugs while working directly on doors.
3, Transfer door stops from bottom edge of fresh food
door and freezer door, if applicable, to opposite
side of door edge.
Use a Phillips screwdriver
for removal and installation.
4. Install handles (see page 11).
5. Reinstall the door(s).
10
Loading ...
Loading ...
Loading ...