Loading ...
Loading ...
Loading ...
HOWTO USE PROGRAMS DIRECTLY FROM
OUR WEB SITE
Our Web site at wwwJFUT,com allows you to access
basic programs, audio programs, and video programs
directly from the internet, AddWonaUoptions are soon
to be avaHabb, See wwwJFUT,com for details,
To use programs from our Web site, the treadmHUmust
be connected to your home computer, See HOW TO
CONNECT YOUR COMPUTER on page 18, in
addition, you must have an internet connection and
an internet service provider, A Hstof specific system
requirements wHUbe found on our Web site,
Follow the steps bebw to use a program from our
Web site,
Insert the key fulty into the console.
See HOW TO TURN ON THE POWER on page
11,
Select the iFIT.com mode.
When the key is in-
serted, the manuaU
mode will be selected,
To use a program from
our Web site, press the
iFIT,com button or
press the Select Program button repeatedly until
the indicator above the iFIT,com button lights,
Go to your computer and start an internet
connection.
Start your web browser, if necessary, and go to
our Web site at www.iFIT.com.
Follow the desired links on our Web site to se-
lect a program.
Read and follow the onqine instructions for using a
program,
Follow the on-line instructions to start the
program.
When you start the program, an on-screen count-
down will begin,
Return to the treadmill and stand on the foot
rails. Find the clip attached to the key and stide
the clip onto the waistband of your clothes.
When the on-screen countdown ends, the program
wiii begin and the walking belt wiii begin to move,
Hold the handrails, step onto the walking belt, and
begin walking, During the program, an electronic
"chirping" sound will alert you when the speed
and/or incline of the treadmill is about to change,
CAUTION: AJways Hsten for the "chirp" and be
prepared for speed and/or incline changes.
if the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console, However, when the next "chirp" is
heard, the speed and/or incline wilt change to
the next settings of the program.
To stop the walking belt at any time, press the
Stop button on the console, The Time/Pace dis°
play will begin to flash, To restart the program,
press the Start button or the Speed + button, After
a moment, the walking belt will begin to move at
1,0 mph, When the next "chirp" is heard, the
speed and incline will change to the next set-
tings of the program,
When the program is completed, the walking belt
wiii stop and the Time/Pace display wiii begin to
flash, Note: To use another program, press the
Stop button and go to step 5,
Note: If the speed or incline of the treadmill
does not change when a "chirp" is heard, make
sure that the iFIT.com indicator is Jit and that
the Time/Pace display is not flashing. In addi-
tion, make sure that the audio cable is properly
connected, that it is fully plugged in, and that it
is not wrapped around a power cord.
Follow your progress with the displays.
See step 5 on page 12,
When the program has ended, remove the key.
See step 7 on page 14,
21
Loading ...
Loading ...
Loading ...