Loading ...
Loading ...
Loading ...
-14-
Accessory Material Application
S A N D I N G
OSL200CR
CG
sanding
finger
- Wood
- Paint
Sanding wood or paint in hard to
reach areas without sanding
paper; example: sanding off paint
between shutter louvers, sanding
wooden floors in corners.
OSL350SD
Sanding
backing
pad,
series
Delta 3.5”
- Depends on sanding sheet
Sanding surfaces close to edges,
in corners or hard to reach areas;
depending on the sanding sheet
for, e.g., sanding wood, paint,
varnish, stone. Fleeces for
cleaning and for texturing wood,
removing rust from metal and for
keying varnishes, polishing felt
for prepolishing.
HCS - High Carbon Steel; BIM - Bi-Metal; CG - Carbide Grit.
Material Application Grit Size
All wooden materials (e.g.,
hardwood, softwood, chipboard,
building board) Metal materials–
Metal materials, fiberglass
and plastics
Paint, varnish, filling compound
and filler
Selecting Sanding/Grinding Sheets
For coarse-sanding, e.g. of
rough, unplanned beams and
boards
For face sanding and planing
small irregularities
For finish and fine sanding of
wood
For sanding off paint
For sanding primer (e.g., for
removing brush dashes, drops
of paint and paint run)
For final sanding of primers
before coating
Coarse
Medium
Fine
Coarse
Medium
Fine
40/60
80/120
180/240
40/60
80/120
180/240
Sand Paper (Red)
Sand Paper (White)
2610051957.qxp_GOP 9/28/18 10:22 AM Page 14
Loading ...
Loading ...
Loading ...