Craftsman 315111250 screwdriver

User Manual - Page 4

For 315111250.

PDF File Manual, 10 pages, Download pdf file

Loading ...
Loading ...
Loading ...
ImportantSafetyInstructionsForCharger
Save these instructions. This manual contains
important safety and operating instructions for
battery charger item number _-11021
(981892-001). Following this rulewill reduce the risk
of electric shock, tire, or serious personal injury.
Before using battery charger, read all Instructions
and cautionary markings In this manual, on
battery charger, and product using battery
charger. Following this rule will reduce the risk of
electric shock, tire, or serious personal iniury.
To reduce risk of injury, charge only nickel-
cadmium and nickel metal hydride type
rechargeable batteries. Other types of batteries
may burst causing personal injury and damage.
Following this rule will reduce the risk of electric
shock, fire, or serious personal injury.
Do not expose charger to rain or snow. Following
this rule will reduce the risk of electric shock, fire, or
serious personal injury.
Use of an attachment not recommended or sold
by the battery charger manufacturer may result in
a risk of fire, electric shock, or injury to persons.
Following this rule will reduce the risk of electric
shock, fire, or serious personal injury.
An extension cord should not be used unless
absolutely necessary. Use of improper extension
cord could result in a risk of fire and electric shock. If
extension cord must be used, make sure:
a. That pins on plug of extension cord are the
same number, size and shape as those of
plug on charger.
b. That extension cord is properly wired and in
good electrical condition;and
c. That wire size is large enough for AC ampere
rating of charger as specified below:
Cord Length (Feet) 25' 50' 100'
Cord Size (AWG) 16 16 16
Note: AWG -- American Wire Gage
Do not operate charger with damaged plug blades.
If damaged, have replaced Immediately by a
qualified serviceman. Followingthis rule wilt reduce
the risk of electric shocK,fire, or serious personal
injury.
Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in arty
way; take it to a qualified serviceman. Following
this rule will reduce the risk of electric shock, fire, or
serious personal injury.
Do not disassemble charger; take it to a qualified
serviceman when service or repair is required.
Incorrect reassembly may result in a risk of
electric shock or fire. Following this rulewill reduce
the risk of electric shock, fire, or serious personal
injury.
To reduce the risk of electric shock, unplug
charger from outlet before attempting any
maintenance or cleaning. Turning off controls will
not reduce this risk. Following thLsrulewill reduce
the risk of electric shock, fire, or serious personal
injury.
Do not use charger outdoors. Following this rule will
reduce the risk of electric shock, fire, or serious
personal injury.
Disconnect charger from power supply when not
in use. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
_ DANGER: RISK OF ELECTRIC SHOCK. DO NOT
TOUCH UNINSULATED PORTION OF OUTPUT
CONNECTOR OR UNINSULATED BAI'rERY
TERMINAL.
Save these instructions. Refer to them frequently
and use them to instruct others who may use this
tool. If you loan someone this tool, loan them
these instructions also. Following this rule will
reduce the risk of electric shock, fire, or serious
personal injury.
_k WARNING:
The operation of any power tool can result in foreign objects being thrown intoyour eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with side shieldsand a full face shield when needed. We recommend Wide Vision
Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears
Retail Stores.
Loading ...
Loading ...
Loading ...