Loading ...
Loading ...
Loading ...
8_ washing procedure
4. Set the SPIN TIMER 1-10
minutes.
5. Incomplete spining.(Severe vibration or
unbalance) See “When you load ...”on page 6.
Rinsing
1. Set the DRAIN SELECTOR KNOB to ‘WASH RINSE’.
2. Supply the proper amount of water as not to
overflow the top of the washing tub.
3. Set the WASH TIMER Magic
Mixer.
4. Drain the water.Set the DRAIN
SELECTOR KNOB to ‘DRAIN’.
5. Repeat this cycle until drain water is clean. (2~3 cycles)
6. Place your drain hose;
- In case no drain pump: Be sure lay the drain
hose down.
- In case drain pump: Be sure place the drain
hose in sink or bath.
Over flow rinse
1. Keep suppling water.
Adjust water pressure to ensure that the amount of
water supplied does not exceed that water drained.
2. Set the WASH TIMER 6~8
minutes.
3. As soon as the
WASH TIMER shuts
off, turn off the water
tap.
4. Set the DRAIN SELECTOR
KNOB to ‘DRAIN’.
Additional rinse
After rinsing you can select this course for more
effective rinse (Don’t select only this course for rinse.)
1. Load the laundry evenly into the spin
basket.
2. Set the
Water
Selector
KNOB to
SPIN (a)
and DRAIN
SELECTOR
KNOB to
‘DRAIN (b)’.
(a) (b)
3. Supply water for about 1minute.
Adjust the water flow to prevent
averflow from the wash tub.
1min.
4. After stopping water
supply, cover the laundry
with safety cover and
close the inner lid.
Inner lid
Safety
cover
5. Close the spin dryer lid.
6. Set the SPIN TIMER 2~3
minutes.
WT16J8PEC_DC68-03040B-08_EN.indd 8 2022-04-28 3:33:53
Loading ...
Loading ...
Loading ...