Loading ...
Loading ...
Loading ...
- 3 -
5、Material of induction film should be same as bottle, the thickness
of induction aluminum foil can be 0.015~0.03mm, we advice not using
vacuum coating aluminum foil, or it may not sealing well.
6.Operation：
1、Connecting 220V power supplies, turn on power switch, when line
voltmeter show input voltage, air cooling start working.
2、According to bottle height and size, adjusting bottle with induction
head space distance(small bottle:2~5mm, big bottle:10mm) and width of
leading fences.
3、According to bottle diameter, preliminary adjustment for suitable
sealing speed. Eg: small bottle, space distance should be short, the speed
should be slow. Big bottle, space distance should be wide, the speed should
be quick.
4、Turn on the induction switch, set the aluminum induction foil(aluminum
foil face to bottle mouth, paper side face to bottle cover).Then tight the
bottle cover, put bottle on deliver tape, and test, attention on point
2 and 3. When it over working, check the sealing effort, until the parameter
can let your product sealing well.
5、Please note the best parameter for your bottle. After setting, when
it is working, you can touch the bottle cover, if it was warm or not,
when you could not feel warm, stopping machine and check, find problem,
and deal with it. Do not let unsealed bottle mix with sealed bottle.
6、When equipment main circuit be hot, overheating protection function
will open, equipment stop working automatic, until temperature reduce to
normal, machine will start working again.
7, Packing list：
NO
NAME
MODEL
QUATITY
Loading ...