Loading ...
Loading ...
MODELS 765H80L • 765H80LB
Page 3
INSTALLATION (CONT’D)
CAUTION: To avoid the possibility of overheating
and/or re, the grille must be installed as shown
in FIG. 12. Acorn nut must attach to threaded rod
through proper hole in light reector.
16. Slide the light reflector into opening in grille
and plug into WHITE receptacle. Use acorn
nut from plastic bag to attach grille reflector
assembly to threaded rod on housing. Tighten
securely using pliers or nut driver. Install an
A19 shape, E26 base LED light bulb - 14 Watt
(max.). (FIG.12)
NOTE: Light turning off or blinking may indicate
an improper lamp wattage or type.
17. Install light lens by 1) hooking one of its tabs
into notch in grille/reflector assembly; 2) apply
light pressure to other tab with fingertips and
3) snap into place. (FIG. 13)
FIG. 12
THREADED ROD
LIGHT
REFLECTOR
ACORN NUT
GRILLE
NOTE: Your grille may look different
than the one shown.
FIG. 13
2
3
1
NOTE: Your
grille may look
different than
the one shown.
Loading ...
Loading ...
Loading ...