Samsung DV53BB8900HD Bespoke 7.8 cu. ft. Ultra-Capacity Ventless Hybrid HeatPump Dryer with AI Optimal Dry in Brushed Navy

Use and Care Manual - Page 66

For DV53BB8900HD.

PDF File Manual, 76 pages, Read Online | Download pdf file

DV53BB8900HD photo
Loading ...
Loading ...
Loading ...
English
English66
Troubleshooting
Checkpoints
If you encounter a problem with the dryer, first check the table below and try the suggestions.
Problem Action
Dryer does not start.
Make sure the dryer is plugged in.
Make sure the door is properly closed.
Check the fuse or reset the circuit breaker.
If you opened the door during a cycle, tap and hold again.
Clean the filter.
Make sure Child Lock is not activated.
The dryer does not warm
up.
Check the fuse or reset the circuit breaker.
Check the lint filter and the heat exchanger. Clean them if necessary.
The dryer may be in the cooling down process of the cycle.
Items are not dried.
Check all of the above. Additionally:
Do not overload the dryer. If the dryer is overloaded, it could take longer
for items to dry.
Dry heavy fabrics separately from light fabrics.
The item(s) are too small and may not get enough spinning inside the
drum.
Clean the filter.
Clean the heat exchanger.
If the “
Clean heat exchanger & tap OK or “Clean heat exchanger
optional filter & tap OK
” message appears on the display, refer to the
Heat exchanger” section on page 63 and clean the heat exchanger.
If a drain hose is connected, make sure water is draining properly.
The dryer is too loud.
Look for coins, loose buttons, nails, and other objects and remove them
immediately.
Check the lint filter. Remove any items stuck inside the lint filter.
Make sure the dryer is level and standing firmly on the floor.
The dryer may hum due to air moving through the drum and fan. This is
normal.
Items are not dried evenly.
Seams, pockets, and other parts of clothing are harder to dry than
others. This is normal.
Sort heavy and light items separately.
DV8900HB_SimpleUX_WEB_OID57652_English.indd 66 2022-09-07  11:27:30
Loading ...
Loading ...
Loading ...