Loading ...
Loading ...
Loading ...
3
ninjakitchen.co.uk
4
ninjakitchen.co.uk
GETTING TO KNOW THE WOODFIRE ELECTRIC BBQ GRILL & SMOKER
FUNCTION BUTTONS
There are 2 ways to achieve authentic smokey
BBQ flavours:
1. Dedicated SMOKER program for cooking
over a longer period of time for deep flavours
and tender results.
2. Add a quick burst of Woodfire Flavour to any
of the other functions using the WOODFIRE
FLAVOUR TECHNOLOGY button.
GRILL: Closed-lid cooking for top and bottom
heat. Best when grilling large or thick cuts of
meat or frozen food or for an all-around sear.
Open the lid while grilling delicate foods or lean
proteins to develop chargrilled textures without
overcooking.
WOODFIRE FLAVOUR TECHNOLOGY: Press
after selecting your cooking function to add
Woodfire Flavour using the Grill, Air Fry, Bake,
Roast or Dehydrate functions. When pressed,
flame icon will illuminate on the display screen.
SMOKER: Create deep, smoky flavours while
cooking low and slow to tenderise large cuts
of meat.
AIR FRY: Achieve crispiness and crunch with
little to no oil and higher fan speeds.
ROAST: Tenderise meats, roast vegetables and
more.
BAKE: Bake breads, cakes and more with lower
fan speeds.
DEHYDRATE: Great for drying fruits, vegetables
and jerky.
REHEAT: Ideal for reheating leftovers so
nothing goes to waste.
OPERATING BUTTONS
DIAL: To power on the unit and select a cooking
function, rotate the dial clockwise until desired
function is selected. To power o the unit, rotate
the dial anti-clockwise to the OFF position.
NOTE: When the unit is powered on, the
display will be illuminated.
TEMP: The default temperature setting will
display, to adjust temperature if desired, use
the - and + buttons next to TEMP.
TIME: To adjust cook time, use the - and +
buttons next to TIME.
START/STOP: Press to start or stop the current
cook function or press and hold for 3 seconds to
skip preheat.
PREHEAT FOR BETTER RESULTS
For best grilling results, let the unit fully preheat
before adding food. Adding food before
preheating is complete may lead to overcooking,
smoke and longer preheat time.
After you set function, time and temperature
then press START, the unit will automatically
begin preheating (except if using the Smoker
function or the Reheat/Dehydrate functions)
without enabling Woodfire Flavour technology.
AIR FRY
REHEAT
HANDLE INSTALLATION
1 Ensure the correct handle is being used on the left and right side. (Refer to Fig. A and note that the
handles have L and R stickers on the underside). A Hex key is taped onto the left handle (see Fig. A).
2 Place unit at edge of table (Fig. B) OR with lid still taped down, carefully place grill upside down by
holding the sides of the unit and the lid down. If tape has been removed, remove all accessories from the
grill and holding the sides of the unit and the lid down, place grill on top of top pulp tray piece to protect
unit (Fig. C).
3 Align each handle with tabs on base, then push up to set each handle in place (Fig. D). Use included Hex
key to tighten pre-assembled screws (2x) on each handle (Fig. E).
EXTENSION CORD
1 If using an extension cord, ensure it is suitable for use outdoors with outdoor appliances. Using
the incorrect cord could lead to the cord overheating, melting and/or a drop in voltage. A drop in
voltage can increase preheat times and impact cooking performance and/or cook times.
BEFORE FIRST USE - CONTINUED
Fig. A
Fig. B
Fig. C
Fig. D
Fig. E
Loading ...
Loading ...
Loading ...