Loading ...
Loading ...
Loading ...
MAINTENANCE SCHEDULE ____._"FiLL IN DATES
,sYOUCOMFL E
DATES
Check Brake Operation
Check Tire Pressure _
Check Operator Presence and
T Interlock Systems V w
R Check for Loose Fasteners I_ V's
A Sharpen/Replace Mower Blades _3
T Lubdcation Chart If
O Check Battery Level V_4
R Clean Battery and Terminals I_ If
Check Transaxle Cooling
v'
Check V-Be fis
Check Engine Oil Level I_ ll_
I
Change Engine Oil (with oil filter) I_1,2 (l_ I
E Change Engine Oil (without oil filter) I_t.,t
N C_ean Air Filter 1_2
G Clean Air Screen ibm/2
NI Mu ffler/Spark I_
Inspect Atrester
E Replace Oil Filter (if equipped) 1_1.2
Clean Engine Cooling Fins I_ 2
Replace Spark Plug ik_
Replace Air Filter Paper Cartridge _2
Replace Fuel Filter
I - Change more Often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditJons.
3 - Replace blades more often when mowing in Sandy so;I,
4 - Not required if equipped with maJnlenanoe4ree battery,
5 - Tighten front axle pivot bolt to 35 ft.4bs, maximum.
DO not overggthen.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades and belts for wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
_) Spindle - _ Spindle
Zerk Zerk
(_Front Wheel Wheel
Bearing ,_Bearing Zerk
Zerk _,
, /
@Engine
'--J shift
- -" "- - Pivots
(DSAE 30 or 10w30 MOTOR OiL
_)GENERAL PURPOSE GREASE
@REFER TO Maintenance "ENGINE"
SECTION
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
17sparingly.
Loading ...
Loading ...
Loading ...