Loading ...
Loading ...
Loading ...
Beforeyoucall forservice...
Troubleshooting tips
Save time and n7oney!Review the charts on the following pages
first and you may not need to call for service.
. /
.Possible Causes -- What ToDo ,. "_
Washer'is unplugged
" * Make sure cord is plugged
securely into a working
outlet.
Water supply is turned off
* Turn both hot and cold
faucets fully on.
(kmtrols are not set * Check controls and
properly make sureCycle knob is
pulled out to ONposition.
lid is open • Close rid and pullCycle
knob out to ONposition.
Circuit breaker/fuse is • Check house circuit
Wipped/biown breakers/fuses. Replace
fuses or reset breaker.
Washer should have
separate outlet.
Control is not set properly • Checkwater temperature
control and adjusL
Water supply is turned off
or improperly connected
Water valvescreensare
stopped up
* Turn both hot and cold
faucets fully on and make
sure hoses are connected
to correct faucets:
| .
.*Turn offthe water source
•and remove the water
connection hoses from
the upper brick of the
washer. Use a brush or
toothpick to Clean the
screens in the machine.
Reconnect the hoses and
turn the water back on.
House water heater is * Make sur6 house water
not set properly heater is delivering water
o o
at120 F.-140 F.
O " O -
- , (48 C.-60 C.).. _ ....
-`, .. _. :- : - : -?.
Loading ...
Loading ...
Loading ...