Loading ...
Loading ...
Loading ...
5
3.0 About this machine and manual
The JET J-7060 Semi-Automatic Horizontal Cut-Off Band Saw incorporates a number of exclusive design
features and innovations to make this saw a powerful and productive addition to machine shops, maintenance
shops, tool rooms, and fabrication and welding shops. The exclusive swivel control panel allows the operator
access to all machine controls from any side of the machine. The exclusive 6-point contact blade guide
assemblies give the machine greater accuracy and longer blade life. The rapid acting, patented, 3-jaw vise
provides simple, fast, and accurate set-ups for both straight and miter cuts. In addition, the semiautomatic cycle
enables the operator to initiate, with the push of a button, the following steps: blade start, saw head down, blade
stop, and saw head up. This completely versatile band saw is a proven time saver, offering optimum sawing
performance.
This manual is provided by JET covering the safe operation and maintenance procedures for the J-7060
Horizontal Band Saw. This manual contains instructions on installation, safety precautions, general operating
procedures, maintenance instructions and parts breakdown. Your machine has been designed and constructed
to provide consistent, long-term operation if used in accordance with the instructions set forth in this document.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our
web site: www.jettools.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.
Register your product using the mail-in card provided, or register online: http://www.jettools.com/us/en/service-
and-support/product-registration/
4.0 Specifications
Model number
J-7060 J-7060-4
Stock number 414476 414476-4
Cutting
capacities
Round
90 degrees 12 in. (304.8 mm)
45 degrees 12 in. (304.8 mm)
Rectangle
90 degrees 12 x 20 in. (304.8 x 508 mm)
45 degrees 12 x 12 in. (304.8 x 304.8 mm)
Blade size 1 x 0.035 x 156 in.
Blade provided 4/6 TPI
Blade wheels Dia. 17 in. (431.8 mm), cast iron
Blade speeds 82 to 262 SFPM, variable speed
Motor
3HP, 3PH, 230V, 60Hz 3HP, 3PH, 460V, 60Hz
Dimensions 87 x 31.5 x 53 in. (2210 x 800 x 1346 mm)
Net weight 1210 lb. (549 kg)
Shipping weight 1342 lb. (609 kg)
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
5.0 Saw features
Figure 1: Saw features: front view
Figure 2: Saw features: rear view
Loading ...
Loading ...
Loading ...