Loading ...
Loading ...
Loading ...
TIPS FOR CORRECT USE
WATER DRAINAGE METHOD
When there is excess water condensation inside the unit, the appliance stops running
and shows “ ” (FULL TANK as mentioned in SELF-DIAGNOSIE). This indicates that
the water condensation needs to be drained using the following procedures:
Manual Draining (fig.14)
Water may need to be drained in high humidity areas
1. Unplug the unit from power source.
2. Place a drain pan under the lower drain plug. See diagram.
3. Remove the lower drain plug.
4. Water will drain out and collect in the drain pan (maybe not supplied).
5. After the water is drained, replace the lower drain plug firmly.
6.Turn on the unit.
To get the best from your appliance, follow these
recommendations:
● Close the windows and doors in the room to be
air conditioned (Fig. 11). When installing the
appliance semi-permanently, you should leave a
door slightly open (as little as 1 cm) to guarantee
correct ventilation;
● Protect the room from direct exposure to the sun
by partiallyclosing curtains and/or blinds to make
the appliance much more economical to run (Fig. 12);
● Never rest objects of any kind on the appliance;
(Fig. 13)
● Do not block the air inlet or outlet of the appliance.
Reduced air flow will result in poor performance and
could damage the unit.
● Make sure there are no heat sources in the room;
● Never use the appliance in very damp rooms
( laundries for example ).
● Never use the appliance outdoors.
● Make sure the appliance is standing on a level
surface. if necessary, place the castor locks under the
front wheels.
Fig.11
Fig.12
Fig.13
-20-
Loading ...
Loading ...
Loading ...