Loading ...
Loading ...
Loading ...
SERVUCE AN ADJUSTMENTS
=;_.......................... .................. ,,,, ,,. ....... :
CAUTION:
O
o
0
o
BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
Depress clutci_Jbrake pedal fully and set parking brake.
Place gearshift lever in "NEUTRAL" position.
Place attachment clutch in "DISENGAGED" position.
Turn ignition key "OFF" and remove key.
Make sure the blades and all moving parts have completely stopped.
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with
plug.
i,,,,,,i, i ii ,,i ii,ll ill _1_ lllll ,i,,_ll:llll,,i, •.......... i,_ ii i .....
TRACTOR
TO REMOVE MOWER (See Fig. 19)
Mower' will be easier to remove from the right side of tractor.
=° Place attachment clutch in "DISENGAGED" position°
o Move attachment lift lever forward to lower mowerto its
lowest position.,
= Roll belt off engine pulley.
= Disconnect clutch rod from clutch lever by removing
retainer spring_
o Disconnect anti-sway bar' from chassis bracket by
removing retainer spring.
= Disconnect suspension arms from rear deck brackets
by removing retainer springs°
• Disconnect front links from deck by removing retainer
springs.
= Raise lift lever to raise suspension arms. Slide mower'
out from under tractor_
IMPORTANT: 1FAN ATTACHMENT OTHER THAN THE
MOWER IS TO BE MOUNTED TO THE TRACTOR, THE
R.H. AND L..H. SUSPENSION ARMS MUST BE REMOVED
FROM TRACTOR_
TO INSTALL MOWER (See Fig. 19)
= Raise attachment lift lever' to its highest position_
• Slide mower under tractorwith discharge guard to right
side of tractor.
= Lower lift lever to its lowest position,
o Install mower in reverse order of removal instructions._
CLUTC
LEVER
SPRING
SUSPENSION ENGINE
ARMS PULLEY
SPRINGS
SIDES)
RETAINER
SPRING
ANTI*SWAY BAR
RETAINER
SPRINGS
(BOTH SLOES)
FIG. 19
.gn
Loading ...
Loading ...
Loading ...