Loading ...
Loading ...
Loading ...
About reversing the door. GEApUio.ces.com
Reversing the Door
Toolsneeded.
[] Standard #2 [] Tape-tipped
Phillipsscrewdriver putty knife
r-_ open the door and remove the filler plugs opposite the
hinges.With the door completely open, removethe bottom
screw from each hinge on the dryer face. Insert these
screws about half way into the TOPholes,for each hinge,
on the opposite side (whereyou removed the filler plugs).
Applyfirm pressureto get the screw started in new holes.
[] Loosentop screw from each hinge on the dryerface half
way. With one hand holding the top of the door and the
other hand holdingthe bottom, removethe door from the
dryer by lifting it UPand OUT.
[] Removethe blind plate from the hinge side ofthe dryer by
removing itstwo screws. Removethe strike plate from the
opposite side of the dryer by removing its two screws.
Reinstallthe plates,on the opposite sides,usingtwo screws
in each plate.
[_ Rotatethe door 180°.Insert it on the opposite side of the
opening by moving the door IN and DOWN until the top
hinge and the bottom hinge are resting on the top screws
inserted in step 1.
REMOVE 4 PLUGS AND KEEP
FOR INSERTION INTO
__THEOPPOSITE SIDE
REMOVE BOTTOM SCREW FROM EACH HINGE
AND INSTALL HALF WAY INTO EACH TOP OF
oPPOSiTEH NGEHOLES
LOOSEN EACH TOP HINGE __I__""A'_"-_ _
EWo Lu WAZ20 ;L'FTm- .....
STRIKE BLIND
PLATE PLATE
ROTATE DOOR 280 ° AND HANG
IT ON TOP HINGE SCREWS
[_ Removethe remaining screws from the sideof the opening
from which the door was removed. With these screws,
secureeach hinge at the bottom. Tightenthe two top screws
of each hinge. Reinsertthe plastic plugs on the side from
which the door was removed.
INSTALL AND TIGHTEN BOTTOM
_N SCREWSANDTIGHTEN TOP
, /
INSERTPLUGS
INTOHOLESON
Loading ...
Loading ...
Loading ...