Loading ...
Loading ...
Loading ...
12
Additional Functions and Descriptions
*1: Temperament
Temperament types
Display Temperament
00
Equaltemperament(defaultseing):
Spacing all semitones at equal pitch intervals, this
temperament is the most widely used.
01
Puretemperament[major]:Major chords in the
key (C) are perfectly tuned.
02
Puretemperament[minor]:Minor chords in the
key (C) are perfectly tuned.
03
Arabic:This scale includes the quarter-tone inter-
vals used in Arabic music.
04
Pythagorean:This ancient Greek scale is espe-
cially eective for playing melodies. It consists of
perfect fths; however, other intervals – the major
third in particular – is out of tune.
05
Werckmeister:The Werckmeister III scale was
created in the later Baroque period to allow rela-
tively free transposition.
06
Kirnberger:The Kirnberger III scale is used
mainly for tuning harpsichords.
07
Slendroscale:This is an Indonesian gamelan
scale with ve notes per octave.
08
Pelogscale:This is an Indonesian gamelan scale
with seven notes per octave.
About stretched tuning
In order to produce the most natural resonance, PIANO1
and PIANO2 sounds use a “stretched tuning” that makes
the notes of the lower range slightly aer than equal tem-
perament, and the upper range slightly sharper. This is
how an acoustic piano is normally tuned by professional
tuners.
*2: Octave of layer mode (L1, L2)
1. Selectthelayerwiththe+or–buonbesidethedis-
play.
L1 appears for layer 1, and L2 appears for layer 2.
2. PresstheBANKbuon.
The octave seing (00) appears in the display.
3. Selecttheoctaveseingwiththe+or–buonbeside
thedisplay.
To return to the default setting, simultaneously press
the + and – buons.
To select the octave for the other layer, press the E.PIANO2
buon to select the layer.
If the sound is in the Single mode, – – – appears in the
display, and a seing cannot be specied.
List of functions
Button Function
Setting Display
Description [default setting]
PIANO1
Pitch 27.5...52.5
427.5...440.0...452.5Hz [40.0 : 440.0Hz]
In order to adapt the D1 pitch to that of an-
other instrument, you can adjust the pitch
in steps of 0.5 Hz.
The standard pitch is A=440Hz, and the de-
fault seing is 40.0.
PIANO2
Temperament *1 00...08
Equal...Pelog scale [00: Equal]
Nine different tunings are selectable, in-
cluding equal temperament, Kirnberger
and Werckmeister temperaments and so on.
E.PIANO1
Volume balance of layer mode
1–9...9–1
1–9 (
Layer 1 min.
)...9–9 (
Both max.
)...
9–1 (
Layer 2 min.
) [9–9]
Adjust the volume balance between the
sounds for layer 1 and layer 2.
The seing range is 1–9...9–9...9–1, with the
number on the left for layer 1 and the num-
ber on the right for layer 2.
E.PIANO2
Octave of layer mode (L1, L2)
*2
-01, 00, 01
±1 Octave [00]
Specify the sound range for layer 1 and
layer 2.
The setting range is ±1 octave for each
sound, and –01, 00 and 01 appear in the dis-
play.
HARPSI/
CLAV
Pedal of layer mode o–_, _–o, o–o
Only 1, Only 2, Both layers [o–o]
Select the layer that the damper eect is ap-
plied to.
The seings are only for the layer 1 sound
(o – –), only for the layer 2 sound (– – o) and
for both sounds (o – o).
VIBES/
GUITAR
Auto power-o *3 oFF, on
Disable, 4 hours
[on]
Loading ...
Loading ...
Loading ...