Loading ...
Loading ...
Loading ...
- 32 -
HOW TO USE / CONNECTING THE UNITS
How can I reset the
parent unit?
You can reset the parent unit by simultaneously press the "power on/
o button" and the round "navigation down button" at the front of the
parent unit for about 1 second. The parent unit will switch o. In order
to turn the parent unit back on, press the "power on/o button". Specic
user information stored in the memory of the parent unit such as user
mode, brightness settings, volume, lullaby selection, zoom selection and
vibration settings will not be lost�
INDICATIONS ON THE PARENT UNIT
Question Answer
The battery LED on the
parent unit turns red�
What should I do?
The battery power is low� If you do not connect the parent unit to
the mains power when the battery LED has turned red and starts to
make a beeping sound, the unit will stop working after approximately
60minutes.
Switch to lower brightness and/or volume to save battery consumption
and connect the parent unit to the mains with the power adapter� (see
chapter ‘Preparing for use’)�
Why does the parent unit
beep?
Your baby monitor beeps in a certain way to tell you what the problem is�
1 beep: parent unit is switched o.
1 beep, every 20 seconds for the rst 3 minutes, after that, every minute:
parent unit is low in battery�
2 quick beeps every 20 seconds: temperature of the baby room is outside
the range that is dened by the user, temperature icon is shown on
parent unit's screen�
3 quick beeps every 20 seconds: connection between parent and baby
unit is lost, link icon is shown on the parent unit's screen and the link
connection button is red�
What does the battery
LED colour (green,
orange, red) or no
burning LED mean for the
status of my battery?
When the parent unit is connected to the mains power the color of the
battery light will show:
* Green: battery is full.
* Orange: battery is charging.
When the parent unit is not connected to the mains power the color of
the battery light will show:
* Red: battery is almost empty (<10%)
* No burning LED: parent unit is not connected to the mains.
Loading ...
Loading ...
Loading ...