Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/50279855-scd845-26/bg10.png)
- 16 -
Note: The link light shows that the parent unit is still on and connected
to the baby unit�
Note: When sensitivity level is not set to 'very high', low sounds will be
muted�
Note: Set the sensitivity level to 'very high' to have continuous sound
on the parent unit� Please see the Sensitivity level chapter for more
information�
All sounds are constantly transmitted to the parent unit� If your baby
cries, the display of the parent unit is still o, but the sound level
lights light up green and the sounds detected by thebaby unitare
transmitted to the parent unit. As long as no sound is detected, the
sound level lights are o.
VOX mode
1 Press the mode button on the side of the parent unit to switch to VOX
mode�
Note: When the display is on, the selected mode is shown in the status
bar. The status baris not visible when the display is o.
When the VOX mode is activated, the display and sound of the parent
unit switch o, if there is no sound detected for 20 seconds.
Whensound is picked up by the baby unit, the displayand sound of
the parent unit switch on immediately.The sounds are transmitted to
the parent unit and the sound level lights light up green� As long as no
sound is detected, the sound level lights are o.
Note: The minimum sound level to activate sound and display is
dened by the sensitivity setting.
20°C
1
AUDIO
VOX
VOX
VOX
VOX
VOX
20°C
1
VOX
20°C
1
VOX
Loading ...
Loading ...
Loading ...