Loading ...
Loading ...
Loading ...
Additional programme settings en
31
Note: The length of the program is
automatically adjusted when the
program is running.
Certain factors can affect the program
length, e.g.:
■ Program settings,
■ Detergent dosage (additional rinse
cycles if required due to foaming),
■ Load size/type of textiles (longer
washing for higher load and for
textiles which absorb more water),
■ Imbalances (e. g. due to fitted
sheets) are offset with several start-
ups of spin cycles,
■ Fluctuations in power supply,
■ Water pressure (infeeding speed).
\ Additional programme
settings
Additional programme setti ngs
Note: You can find possible additional
programme settings in the overview;
these differ depending on the model.
Speed/Eco
(G/F Speed/Eco)
Button with two possible settings for
adapting the selected programme:
■ G Speed
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than, the selected
programme, without the Speed/Eco
setting.
Note: Do not exceed the maximum
load.
■ F Eco
Energy-optimised washing by
reducing the temperature while
achieving a washing result that is
consistent with the selected
programme, without the Speed/Eco
setting.
Select the button to do this. First of all,
you can select the G Speed setting. If
you select the button again, the F Eco
setting is active. The respective symbol
is shown in the display when the setting
is activated.
If you select the button again, no setting
is active.
Water/Rinse Plus
(ë Water/Rinse Plus)
Additional rinse cycle depending on the
programme; longer programme length
for particularly sensitive skin and/or for
areas with very soft water.
Soak
(% Soaking)
Before the main wash cycle starts, the
washing remains for longer in the water
to partially dissolve intensive soiling.
Notes
■ Put detergent in dispenser I before
starting the appliance.
■ Load laundry of the same colour.
■ If your appliance does not have this
additional programme setting, you
can soak as follows:
1. Put detergent in dispenser II before
starting the appliance.
2. Select the i Cottons 40 °C
programme and the A Start/
Reload button.
3. Select the A Start/Reload button
after approx. 10 minutes. The
laundry remains in the soaking
solution.
4. Leave the laundry to soak for as long
as required, then either select the
A Start/Reload button again to
continue the programme or change
the programme.
Loading ...
Loading ...
Loading ...