Loading ...
Loading ...
Loading ...
1. Remove the screw holding each slide rail and drawer bracket with a screwdriver
2. Lift the drawer front up and out of the slide rail buckle
3. Lift the drawer up and out to remove
To replace the drawer, reverse steps 1-3
If the two drawer faces are not even, follow these steps:
dealing with drawers
removing and replacing drawers
adjusting the upper and lower drawer faces
ATTACHMENT SCREWS
ADJUSTMENT SCREWS
1. Remove the drawer from the side rails by removing the four screws shown in Fig 1
2. Lift the drawer up and out of the unit
3. The drawer face is attached by 6 screws shown in Fig 2 - loosen these screws
4. Use the smaller adjustment screw below to move the face in or out as required
5. Re-tighten the 6 screws loosened in Step 3.
6. Replace the drawer and re-attach using the 4 screws removed in Step 1
Figure 1
Figure 2
Loading ...
Loading ...
Loading ...