Loading ...
Loading ...
Loading ...
anti-tip bracket
for use in freestanding applications
When drawers, racks and shelves are extended while loaded, there is a danger of tipping the unit.
In these cases an Anti-Tip Bracket must be installed on the rear right or left side.
The Anti-Tip Bracket kit comes with a bolt and washers to mount to the rear of the refrigerator and
three different sets of fasteners to mount it to any of the following: Dry Wall Construction, Wooden
Flooring or Concrete Flooring.
DRYWALL CONSTRUCTION: (2 Screws) The bracket is screwed
to the wall and at least one of the screws must be into a stud
within the wall.
WOODEN FLOORING: (2 Screws) The bracket must be screwed
down into the flooring.
CONCRETE FLOORING: (Expansion Bolt) A 3/8” hole is bored
into the flooring 1 3/4” to 2” deep. The expansion sleeve is set
with a mallet into the hole and the bracket is bolted to the floor.
Make certain that the unit will not tip when finished.
FAILURE TO SECURE THE UNIT PROPERLY CAN CREATE A
DANGEROUS CONDITION.
ANTI-TIP BRACKET
Loading ...
Loading ...
Loading ...