Loading ...
Loading ...
Loading ...
Surface Cooking
Care of the Griddle
Before first use:
• Wash Griddle in hot soapy water. Rinse and then dry
completely.
After each use:
• Store in a dry place.
• After each use, clean with hot soapy water.
•THE GRIDDLE iS DISHWASHER SAFE.
• Dry Immediately before storing.
Using the Griddle:
• Place the griddle centered over the Bridge Burner
(some models). For location refer to Fig. 1.
• Preheat the griddle for 5 minutes on medium to Fig. 1
medium low setting. Slow preheat ensures even
heat distribution during the cooking process.
• DO NOT preheat the griddle on Hi setting. Preheating on Hi may warp the griddle and prevent even heat distribution.
To Set the Cooktop Lockout Feature (some models)
The L_ pad is used to activate the Cooktop Lockout feature which will lock all gas surface burners from being operated.
This feature will only lock the gas burners on the cooktop.
....iiii.......
To turn the Cooktop Lockout Feature ON:
1. BE SURE ALL GAS SURFACE BURNER CONTROLS ARE SETTO THE OFF POSiTiON.
2. Press & hold (_ until one beep is heard (after 3 seconds). The Cooktop Locked indicator light will turn ON and the gas
surface burners and functions are locked out until the cooktop is unlocked.
To turn the Cooktop Lockout Feature OFF:
1. BE SURE ALL GAS SURFACE BURNER CONTROLS ARE SETTO THE OFF POSiTiON.
2. Press & hold (_ until one beep is heard (after 3 seconds). The Cooktop Locked indicator light will turn OFF and the
gas surface burners may be used normally.
TU RNALL GAS SURFACE CONTROL KNOBS TO OFF POSiTiON B EFORE UNLOCKING TH E COOKTOP
-- To avoid a potential gas flow or fire be sure that ALL gas surface control knobs are set to the OFF position before unlocking
or locking the cooktop.
iMPORTANT NOTE: Starting a Self=Clean cycle will automatically turn the Cooktop Lockout feature ON. The
cooktop will remain locked after the Self=Clean cycle. Once the Self=Cleaning cycle has completed and the Door
Locked indicator Light has turned OFF, you MUST unlock the cooktop before the gas surface burners will
operate.
Loading ...
Loading ...
Loading ...