Loading ...
Loading ...
Loading ...
_n_. _LH Section_
Page 20
8. Troubleshooting
Troubleshooting
If the product does not work:
Before you contact the technical service department, make sure that the product is plugged in, the
electric fuse (on selected models) is in correctly and electric wiring is connected. (Fuses can be purchased
from your local electrical dealer or hardware store). Weak air suction may be caused by back draft ns
remaining closed. Do not take any action that will damage the product.
Check electric connection. Voltage of the electric
network should be between 220 - 240V, rangehood
should be connected to grounded plug and turned on.
Check motor switch. Please ensure that there is power
to the rangehood and the rangehood is switched on.
Check lamp switch. Lamp switch should be at on
position.
Check metal lter. Metal lter should be washed
regularly, see lter cleaning.
Check lamps. Lamps should be rm.
Check outlet. Outlet should be open.
Check lamps and fuse. Make sure they are not broken
or faulty.
Please make sure there is no obstruction in ducting or
back draft ns.
Check the outlet, make sure it is not blocked and you
have the correct diameter ducting installed.
Rangehood does not work
X X
Light does not work
X X X X
Rangehood air suction is weak
X X X X
Rangehood does not direct air out
(through chimney)
X X
Loud noise from the rangehood
X
Loading ...
Loading ...
Loading ...