Loading ...
Loading ...
Loading ...
_n_. _LH Section_
Page 14
6. Installation
Mounting Points for Body
DANGER
Always switch o and disconnect the power supply before installing the rangehood.
Failure to do so may cause serious injury.
Installation
Method one
Installation
method two
Installation
Method one
Installation
method two
Step 1
Open the glass panel, remove the lter and four
screws indictated below.
Step 2
Carefully remove the Glass Fascia and
disconnect any attached cables
Step 3
Install the rangehood within the cabinet using
the front and rear positional holes. (Left and
right positional holes can also be used as
another option to ax the rangehood to the
cabient).
Step 4
Once secured with the cabinet correctly,
replace the glass fascia, the four screws,
indicated below, and lters.
Installation
Method one
Installation
method two
Installation
Method one
Installation
method two
Installation
Method one
Installation
method two
Filter
Four Fascia screws
Glass Fascia
Rangehood front and
rear fastening holes
Rangehood side
fastening holes
Replace the four
Fascia screws
upon completion
Loading ...
Loading ...
Loading ...