Lexmark MX810DTPE User's Guide PDF Lexmark MX810 Series

Loading ...

Some held jobs were not restored

From the printer control panel, touch Continue to delete the indicated job.

Note: Held jobs that are not restored remain in the printer hard disk and are inaccessible.

Standard network software error [54]

Try one or more of the following:

• From the printer control panel, touch Continue to continue printing.

• Turn o the printer, and then turn it back on.

• Update the network ﬁrmware in the printer or print server. For more information, visit the Lexmark

support Web site at

http://support.lexmark.com or contact customer support, and then report the

message.

Standard USB port disabled [56]

Try one or more of the following:

• From the printer control panel, touch Continue to clear the message.

• Enable the USB port. From the printer control panel, navigate to:

Network/Ports > USB

Buer

> Auto

Note: The printer discards any data received through the USB port.

Supply needed to complete job

Do either of the following:

• Install the missing supply to complete the job.

• Cancel the current job.

The device is operating in Safe Mode. Some print options may be disabled

or provide unexpected results.

Touc h Continue to clear the message.

Too many bins attached [58]

1 Turn

o

the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra bins.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Troubleshooting 310

Loading ...

Lexmark MX810DTPE