Loading ...
Loading ...
Loading ...
SERVICE TECHNICIAN CHECK_
'When the furnace is being inspected for:c0ndition
and operation have the Service Technician check the
following items.
For additional information the Service Technician
can consult the installation instructions and ap-
plicable service manual for the furna'ce.
1. Check for adequate combustion air being sup-
plied to the furnace area and all air openings in-
to or from the furnace.
2. Check all flue gas passages including main and
pilot burners, heat exchanger, and vent pipe.
3. Check gas pipe and all connections inside and
leading to the furnace for leaks.
4. Check electrical wiring and connections.
5.
Check supply and return air ducts for leakage,
blockage and connections to-furnace,
.
Check circulating air blower wheel and motor,
clean and lubricate if required,
7. Perform: an Operational checkout on the furnace
tO :be sure safety: c0nt¢ols function and that fur-
nace oper_te_ _r0perly. ' ....
FREEZING TEMPERATURES
AND YOUR HOME
Your furnace is equipped with safety devices that may
keep it from operating if there are any abnormal con-
ditions affecting the furnace and L.P. models may not
operate if there is even a brief or slight interruption
in the electric power or gas supply,
tf your furnace remains shut down long enough dur-
ing freezing temperatures, for water pipes to freeze
it could result in serious water damage,
tf your home will be unattended during this time you
should take these precautions.
1. Shut the water off at the main inlet into your home
anddrain the water lines if possible,
2. Have someone check your home as often as
necessary for temperature conditions that could
cause water damage. Suggest they call a qualified
service agency if required,
Loading ...
Loading ...
Loading ...