Loading ...
Loading ...
Loading ...
5
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at s[email protected] or 1-877-90SUNNY (877-907-
8669).
STEP 1
Loosen and pull the Release Knob (No. 45) from the
folded Rear and Front Main Frame (No. 54 and No.
55), then lower the Adjustable Set (No. 47) and
reinsert the Release Knob (No. 45) into the upper hole
or middle hole of Adjustable Set (No. 47). Retighten
the Release Knob (No. 45) by hand.
NOTE: There are 3 modes for the bike: bike,
recumbent bike, folding. There are 3 holes in the
Adjustable Set (No. 47). To set the mode, insert the
Release Knob (No. 45) into the corresponding hole in
the Adjustable Set (No. 47) and tighten.
Upper Hole = Bike, Middle Hole = Recumbent
bike, Bottom Hole = Folding
Attach Rear Stabilizer (No. 6) to the Front Main
Frame (No. 55) using 2 Curved Washers (No. 2), 2
Spring Washers (No. 3), 2 Carriage Bolts (No. 1),
and 2 Cap Nuts (No. 4). Secure and tighten with
Spanner (No. A).
Attach Front Stabilizer (No. 7) to Rear Main Frame
(No. 54) with 2 Curved Washers (No. 2), 2 Spring
Washers (No. 3), 2 Carriage Bolts (No. 1), and 2 Cap
Nuts (No. 4). Secure and tighten with Spanner (No.
A).
Loading ...
Loading ...
Loading ...