Loading ...
Loading ...
Loading ...
10
3.1 Disconnect the cooler
3.2 Stop using the cooler
3.3 Cleaning
3 MAINTENANCE OF BEVERAGE COOLER
Unplug the power plug to disconnect the cooler.
• If the cooler is left unused for a long time please:
• Unplug the cooler.
• Clean the cooler.
• Keep the cooler door open.
Do not use detergent and solvent with sand or acid.
• Clean dust behind the cooler and on the ground to improve the cooling effect and energy
saving.
• Check the door gasket regularly to make sure there is no debris. Clean the door gasket
with a soft cloth dampened with soapy water or diluted detergent.
• Clean the interior of the appliance regularly to avoid odor.
• Please turn off the power before cleaning interior, remove all food, shelves, drawers, etc.
• Use a soft cloth or sponge to clean the inside of the appliance, with two tablespoons
of baking soda and a quart of warm water. Then rinse with water and wipe clean. After
cleaning, open the door and let it dry naturally before turning on the power.
• For areas that are difficult to clean (such as narrow gaps or corners), it is recommended
to wipe them regularly with a soft rag, soft brush, etc. to ensure no contaminants or
bacteria accumulate in these areas.
• Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in
the interior of the appliance or contaminate food.
• Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water
or diluted detergent. Dry with a soft cloth or dry naturally.
• The wooden wine rack should be cleaned with a dry cloth. The rack should not be directly
immersed in liquid to prevent cracking or mold from moisture.
• Wipe the outer surface of the appliance with a soft cloth dampened with soapy water,
detergent, etc., and then wipe dry.
• Do not use hard brushes, clean steel balls, wire brushes, abrasives (such as toothpastes),
organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline
items, which may damage the cooler surface and interior. Boiling water and organic
solvents such as benzene may deform or damage plastic parts.
• Do not rinse directly with water or other liquids during cleaning to avoid short circuits or
damage to the electrical insulation.
Please unplug the appliance for defrost and cleaning.
Loading ...
Loading ...
Loading ...