Loading ...
Loading ...
Loading ...
7
2.4 Placement
2.5 Start to Use
Before using the cooler, remove all packaging materials including bottom
cushions, foam pads and tape inside, tear off the protective film on the
door and the appliance body.
The cooler should be placed in a well-ventilated indoor place on ground
that is flat and sturdy. (Rotate left or right to adjust the wheel for leveling, if
unstable)
Keep away from heat and avoid direct sunlight. Do not place the appliance
in moist or watery places to prevent rust or reduction of insulation.
Please leave at least 30 cm of space above the appliance, and 10 cm from
both sides and backside to facilitate heat dissipation.
The cooler must stand upright for half an hour before connecting power
when it is first started.
Clean the interior before using for the first time.
Do not connect the cooler to electronic energy saving plugs and converters
that can convert DC into AC (e.g.: solar energy system, ship grid).
When the compressor is running, there may be water drops or frost on the
backside of the cooler. Wiping out frost or water drops is not needed as the
water will be collected into drain tank, then inflow into water disposal pan
above the compressor and vaporized.
2.7 Usage of Temperature Zones Inside the Beverage Cooler
Due to different temperature zones generated due to air circulation in the
cooler, the upper areas temperature is higher than the lower area.
2.6 The Arrangement of Bottle
Do not let bottles touch the coolers back in order to maintain good air
circulation within the cooler. The bottle number may be different from bottles
in different shapes and sizes. Oversized bottles may impact the number of
bottles that can be stored inside the beverage cabinet.
2.8 Energy Saving Tips
The cooler should be placed in a dry and well-ventilated room. The cooler
should not be placed in direct sunlight or next to a heat source (such as a
radiator, stove, etc.), and a suitable insulation board should be applied if
necessary.
Do not keep the cooler door open for too long.
Loading ...
Loading ...
Loading ...