Loading ...
Loading ...
Loading ...
English
15
Connecting instruments
Connect your guitars, basses or any other mono instruments to the instrument inputs on iRig Pro Duo I/O using
an1⁄4”plugunbalanced(TSor“mono”)guitarcord.
IMPORTANT: the instrument input on iRig Pro Duo I/O will NOT work if a cable with balanced (TRS or “stereo”)
1⁄4”plugisused.
NOTE: In your audio software, select the appropriate iRig Pro Duo I/O input (1 or 2) as the source of the track
you will be recording to. Adjust the channel gain knob until you have sufficient audio signal without clipping.
Connecting monitors and headphones
• Connect a pair of active studio monitors or an audio amplifier to the 1/4” Line Output jacks labeled Left-
Right. If your monitor inputs or amplifier inputs are the RCA type, use 1/4” to RCA cables or adapters to
make the connection.
• Connect headphones to the 1/8” output jack and adjust its level via the headphone thumbwheel.
MIDI IN/OUT
MIDI IN
• Connect the 2.5mm-to-MIDI cable to the iRig Pro Duo I/O MIDI IN port and to the MIDI OUT port on your
keyboard or controller.
• Open a Core MIDI compatible application on your iOS device or on your computer and set “iRig Pro Duo
I/O” as the MIDI input device.
• When iRig Pro Duo I/O is receiving MIDI messages the MIDI LED will blink blue.
Loading ...
Loading ...
Loading ...