Loading ...
Loading ...
Loading ...
2. Hold both sides of the
inner blades and pull straight
up (Fig. 4).
3. Firmly hold the new inner
blade and gently guide it into
the inner blade mount.
Caution: MAKE SURE YOU DO NOT LOSE THE
SMALL SPRING UNDER THE CUTTERS.
4. Firmly press the inner blades until they snap
into place.
5. Replace the foil frame.
BIKINI TRIMMER
COMB ATTACHMENT
1. Place the comb attachment on the bikini trim-
mer head and press down (see Fig. 5).
2. Push up the comb attachment to release.
(see Fig. 6).
STORAGE
STAND
The storage stand is
designed with cus-
tomized locations
for both the bikini
and eyebrow trim-
mer. After each use
and maintenance,
place the bikini trimmer and eyebrow trimmer
the larger blade only.
8. Place the comb on the head in the longest posi-
tion by sliding the comb into the groove on the
head closest to the blades.
9. Gently move the comb through the hair. If you
need to remove more hair, move the comb to the
shortest position. If you want to remove the hair
completely, leave the comb off and move the
blades against the direction of growth.
10. When finished, move the on/off switch to the
OFF position and clean the blades with the sup-
plied cleaning brush.
REPLACING THE FOILS FRAME
1. It is time to replace the foils when you find you
have to push harder on the shaver to get a close
shave, or if you have to go over your leg area more
often to get a smooth result, or if you experience
skin irritation. Replacement time will depend on
how often use your shaver and how quickly your
hair grows.
2. When replacing the foils, press the foil frame
release buttons on the both sides of the shaver
head, remove and then gently insert the new foil
frame into position, being careful not to push on
the foils.
REPLACING THE CUTTER
(INNER BLADES)
CAUTION: NEVER REPLACE THE CUTTERS WITHOUT
REPLACING THE FOILS AS WELL.
1. To remove the shaver head from the unit, press
the release buttons on both sides of the foil frame
and then remove it from shaver head, the cutter
is now in view.
comb on the cutting blades first, and then snap
down on to the back of the trimmer head.
8. Start with the longest setting, by moving the
comb switch away from the back of the trimmer.
9. Gently move the comb through the hair in the
direction of growth.
10. After you have done this with the longest set-
ting, if you want to make the hair shorter, move to
the next lowest position until the desired length of
hair is achieved.
11. After hair removal, run a comb or brush (not
included) through the hair to remove any cut loose
hairs
12. When you have finished, move the switch
to the OFF position. Clean the blades with the
provided brush and then return the handle to the
charging base to ensure it is fully charged for the
next use.
USING THE EYEBROW TRIMMER
1. Be sure the unit is fully charged
2. Attach the trimming head as described in
“Changing the Heads” section
3. This trimmer comes with two trimming blades.
The larger blade can be used to trim body hair and
eyebrows. The smaller blade is ideal for detailing.
4. To outline and shape your eyebrows, use the
trimmer without the attachment comb.
5. Move the power switch to the ON position.
6. Use the blades to define the edge of the eye-
brow
7. Once the shape of your eyebrow has been defined,
you may thin out the hair using the attachment comb
NOTE: Attachment comb is designed to work with
into the customized locations for storage (see
Fig. 7).
RINSE THE SHAVER HEAD
1. Rinse the shaver cutter and foil frame under
warm or cold running water only; do not use
hot water (you can also use the cleaning brush
which is included).
2. Allow the shaver head and foil frame and
cutters to air-dry before replacing foil frame.
CAUTION
1. When shaking off excess water, hold the
main unit firmly to prevent releasing the head
assembly or dropping the unit.
2. Do not use a dryer or heater to dry the
shaver. This may result in malfunction or
damage to the shaver.
NOTE: Never pull on the
charging stand cord.
Never twist or wrap the
cord around the charging
stand. Lay it flat in the
storage pouch provided
with the cord coiled up
when not in use.
NOTE: The product you have purchased contains
rechargeable batteries. The batteries are
recyclable. At the end of their useful life, under
various state and local laws, it may be illegal
to dispose of these batteries into the municipal
waste stream. Check with your local solid waste
officials for details in your area for recycling
option or proper disposal.
Fig. 5
Fig. 6
Fig. 4
eyebrow
trimmer
bikini trimmer
Fig. 7
Loading ...
Loading ...
Loading ...