Loading ...
Loading ...
OPERATING
INSTRUCTIONS
HOW TO CHARGE
1. Make sure the on/off switch is in the
OFF position
2. Plug the Adapter into a 120V outlet
3. Place the rechargeable handle on the base on
the charging contacts
4. The charging indicator light should go on,
indicating that the unit is being charged
5. Before the first use, or if the device has not
been used for a long time, be sure to charge the
unit for 16 hours.
CHANGING THE HEADS
Before changing the heads, be sure that the
on/off switch is in the OFF position.
To remove the shaver head, gently twist counter
clockwise and gently pull
the head up and away from
the handle (see Fig. 1).
Be careful not to push
against or hold on to the
foil. It is delicate and may
be easily damaged.
To install the Bikini or the
eyebrow trimmer head,
reverse the removal
process. Position the
head and gently twist
clockwise until the
attachment snaps into
place (see Fig. 2).
To remove the bikini or the eyebrow trimmer,
follow the same process for removing the shaver
head.
USING THE SHAVER
The shaver head is designed to provide a clean,
close shave to your legs, arms, and underarms.
Take care with the foil as it is very sensitive and
easily damaged. Always inspect it for damage
before you use it.
Never use a foil that is damaged, as this can result
in injury. Make sure your skin is clean and dry
before use. Do not use any lotions or oils before
shaving.
SHAVING
NOTE: if you are switching to an electric shaver
for the first time, it will take 12 uses for your
skin and hair to adjust to this new method of
removing hair. Do not evaluate performance
until you have allowed your skin and hair to
adjust.
1. Be sure the unit is fully charged
2. Attach the shaver head as describe in “Changing
The Heads” section
3. Move the power switch to the ON position
4. Hold the shaving foil against the skin moving the
shaver gently against the direction of hair growth
5. Don’t push too hard against the skin as this will
cause irritation and may damage the foil
6. As your skin may be sensitive after shaving, test
your moisturizer on a small patch of skin and wait
to see if irritation occurs
7. Cleaning: After each use you will need to clean
the shaver head to ensure continued performance
8. Move the power on/off switch to the OFF position.
9. Remove the shaver head from the handle
10. Remove the foil head
assembly from the shaver
head by pushing on the two
side buttons and pulling the
foil away from the head (see
Fig. 3).
11. Using the supplied cleaning brush, gently brush
the hair away from the cutter. Blow the hair off the
foil, do not use the brush on the foil, it will cause
damage.
12. The head may also be rinsed under water. Be
sure to allow both to dry before using.
To maintain the best cutting performance, be sure
to replace the foil head and cutter every six months
of regular use. Contact Conair Customer Service to
order the replacement parts
TRIMMING
1. Be sure the unit is fully charged
2. Attach the trimming head as described in
“Changing the Heads” section
3. To fully remove hair or to outline the bikini
area, use the trimmer without the attachment
comb
4. When removing hair, gently move the blades
against the direction of growth.
5. To outline, place the blades perpendicular to
the skin surface and apply the blades to the edge
of the hair. Use the blades to create the desired
outline.
6. For the cleanest finish, follow up with the foil
shaver
7. For cutting hair without completely removing it,
attach the 5-position comb to the head. Place the
Fig. 1
Fig. 2
Fig. 3
Loading ...
Loading ...
Loading ...