Loading ...
Loading ...
Loading ...
2. Refer to the vehicle’s owner’s manual on how to clean the battery
terminal.
3. Once clean, repeat steps 1-2.
4. If the Red error message continues, one of the 10 Safety Checks listed
were found. See a certified mechanic.
I completed steps 1-3, but the vehicle did not start.
i. Disconnect the Smart Jumper Cables from the battery and from the AutoBoost.
Wait 60 seconds, then repeat Jump Starting steps 1-3.
ii. If the vehicle does not start after the third try, consult a certified mechanic.
Smart Jumper Cables - 10 Safety Checks
The Smart Jumper Cables have 10 Safety Checks & Levels of Protection
1. Reverse Polarity
2. Short Circuit
3. Over-Charge
4. Over-Discharge
5. Over-Temperature
6. Timeout
7. Vehicle Battery False Voltage
8. Vehicle Engine Voltage
9. Non-Sparking
10. Low-Input Voltage