Loading ...
Loading ...
Loading ...
2. Single click to scan through the modes, or press and hold the Power Button to shut
off the Flashlight
Flashlight Modes
On | S.O.S. | Bright | Off
Storing the AutoBoost
The ideal storage location for the AutoBoost is inside in a cool, dry place. Batteries are
affected by temperature. The ideal storage temperature is 70° F (21°C).
NOTE: If the AutoBoost is exposed to extreme temperatures (14°F - 140°F / -20° - 60°C),
it is recommended to allow the AutoBoost to re-acclimate to the ideal temperature of
70°F before using.
How to Use the Jump Starter
1. Prep
a. Locate the vehicle’s battery.
b. Open the silicone cover on the AutoBoost and plug in the Smart Cables to the
Jump Start Port.
c. The Safety Check Lights on the box of the Smart Jumper Cables will flash red
and green. This indicates that you are ready to move onto step 2.
2. Attach
a. Connect the RED Clamp to the positive terminal (+).
b. Connect the BLACK clamp to the negative terminal (-).
c. The Safety Check Light will change to a solid green, indicating it is ready for
Step 3.
3. Start
a. Start the vehicle.
b. *When done, remove the jumper cables in the reverse order that they were
connected.
TROUBLE SHOOTING
If the Safety Check Lights continue to blink:
i. Check the connection of the Clamps on the vehicle’s battery. Try disconnecting
and repeating step 2.
If the Safety Check Lights changes to a solid red:
i. Check the connection.
ii. If the battery terminal is heavily corroded, it may cause a bad connection leading
to an error message.
1. Remove the Smart Jump Cables from the engine and the AutoBoost.
Loading ...