Loading ...
Loading ...
Loading ...
Figure 13.Automatic drive disconnect
A - Automatic drive disconnect DRIVEposition
B - Automatic drive disconnect PUSHposition
C - Automatic drive disconnect
How to Set the Parking Brake
1. Completely push the brakepedal forward.
2. Lift the parking brake lever (Figure14).
3. Removeyour foot from the brakepedal and then
releasethe parking brake lever. Make surethe parking
brakewill hold the unit.
4. To releasethe parking brake,completely push the brake
pedal forward. The parking brakewill automatically
release.
WARNING:Beforeyou leavethe operator'sposition,
movethespeedcontrolpedaltothe neutral(N)
position.Set theparkingbrake. Movethe blade
rotationcontroltothe DISENGAGEposition.Stopthe
engineand removethe ignitionkey.
Howto Changethe CuttingHeight
To changethe cutting height, raiseor lower the deck ift
lever as follows:
1. Move the deck lift lever forward to lower the mower
housing and backto raisethe mower deck (Figure 15).
2. Whenyou ride on a sidewalk or road,move the deck lift
leverto the highest position and disengagethe blades
(Figures 10, 11).
Figure 15.Lift control
A - Deckrift lever
Howto Stopthe Unit
1. Slowly removeyour foot from the speedcontrol pedal.
Thespeedcontrol pedalwill automatically return to the
NEUTRALposition and the unit will stop.
2. Move the blade rotation control to the DISENGAGE
position.
3. Setthe parking brake.
,_ WARNING:Make sure theparking brakewill holdthe unit.
4. Move the throttle control to the SLOWposition.
5. To stop the engine,turn the ignition key to the OFF
position. Removethe key.
-.,z
o
-,,z
Figure 14.Parkingbrake
A - Brakepedal
B - Parkingbrake lever
English
15
Loading ...
Loading ...
Loading ...