Loading ...
Loading ...
Loading ...
After cleaning, replace drawers and covers in
reverse order. Reinstall the gasket at the rear of the
top drawer. Fit the end of
the plastic drawer support
into the slot on the gasket,
with the rubber gasket
flap facing you, Make
sure the gasket snaps
into place.
Then replace the light
panel by hanging top of
panel on upper pins and
pushing in at bottom°
Drain Opening in Freezer Compartment
When cleaning, remove
the freezer bin and flush
a solution of baking soda
(one teaspoon) and two
cups of hot (not boiling)
water through the drain
line with the help of a
meat baster. This will
help eliminate odor and
reduce the likelihood of
a clogged drain line.
If drain becomes clogged, use a meat baster and
baking-soda-and-water solution to force the clog
through the drain lineo
Condenser
The condenser is located
behind the base grille. For
most efficient operation,
remove the base grille
(see page 3) and sweep
away or vacuum up dust
that is readily accessible_
For best results, use a brush specially designed for
this purpose. It is available at your Sears store or
service center. This easy cleaning operation should
be done at least once a year.
Behind Refrigerator
Take care moving your refrigerator away from the
wall. All types of floor coverings can be damaged,
particularly cushioned coverings and those with
embossed surfaces. Pull the refrigerator straight out
and return it to position by pushing it straight Jno
Moving refrigerator in a side direction may damage
floor covering or refrigerator.
Light Bulb Replacement
Unplug refrigerator before changing a light bulb.
Fresh Food Compartment
Interior
1. Pull bottom of light
panel down about
1M'--just enough to
disengage tip at rear
from grooves in retainers
on rear walt.
2. Lift panel to
disengage top from tabs
on control housing and
remove panel.
After replacing with
same size bulb, reinstall
panel (hang top on tabs;
pull bottom down and
push it back, and release
it to let lip engage
grooves in retainers)_
Freezer Compartment
1. Remove shelf just
below light panel (Shelf
will be easier to remove
if it is emptied first°)
2. PLsllplastic light panel towcordyou. (It will bend to
free tabs from grooves.)
3. After replacing with same size bulb, reinstall
panel and shelf.
t3
Loading ...
Loading ...
Loading ...