Loading ...
2
Drain hose
to drain
Drain hose to
bottom port
Siphon
break
Air bleed vent
Wire tie
Hole in
support
Figure 4
Drain hose sleeve
Plastic drain hose
Figure 3
285319-B
Figure 5
For machines with top drain hose
connector located in upper right:
INSTALLATION PROCEDURE
1. Remove hose connector from machine discharge hose.
2. Install siphon break to machine discharge hose, using
clamp supplied.
See Figure 3.
3. Install drain hose to siphon break as shown in Figure
3,
using clamp supplied. Cut to fit the particular drain
installation.
For machines with top drain hose
connector located in upper left:
INSTALLATION PROCEDURE
1. Install plastic drain hose to drain connector.
2. Install siphon break using wire tie. See Figure 4.
3. Measure and cut plastic drain hose to fit bottom port
of siphon break. See Figure 4.
4. Install drain hose sleeve in plastic drain hose. See
Figure 5.
5. Install plastic drain hose with sleeve installed, using
clamp supplied, to bottom port of siphon break.
See
Figure 4.
6. Install remaining length of plastic drain hose with
sleeve installed (see Figures 4 and 5) to side port of
siphon break, using clamp supplied. Cut to fit the
particular drain installation.
Clamp
Machine discharge hose
Siphon
break
Air
bleed
vent
Drain
hose
Loading ...
Loading ...