Loading ...
Loading ...
Loading ...
11
Please note:
This symbol indicates recommendations and important
information for the user.
- If your appliance is equipped with a
polythene tape used as carry handle,
remove it before connecting appliance
to the outlet.
- Always use the appliance in an upright
position.
- To disconnect heater, turn controls to
o, then remove plug from outlet.
- Connect to properly polarized outlets
only.
- This heater is not intended for use
with an extension cord or outlet
strip. Plug the cord directly into an
appropriate wall receptable.
- Check that neither the appliance nor
the power cable have been damaged
in any way during transportation.
- Make sure that no pieces of polystyrene
or other packaging material have
been left on the appliance. It may be
necessary to pass over the appliance
with a vacuum cleaner.
- When switching on the appliance for
the rst time, allow it to run at full
power for at least two hours to get
rid of the unpleasant smell. Make sure
that the room in which the appliance
is located is well ventilated during
this operation. It is normal for the
appliance to emit small cracking
sounds when you turn it on.
- Do not use the appliance in rooms
with a oor area of less than 4mq (43
square feet).
- Before putting the appliance away,
make sure it is completely o and
unplugged from the mains socket.
Wrap the cable around the base.
Do not store in dusty atmospheres.
- Do not rest anything on the appliance.
- Do not obstruct the air intake and
outlet grilles (danger of overheating).
- Do not place the heater near a bed
because objects such as pillows or
blankets can fall o the bed and be
ignited by the heater.
-
(Certain models only)
A tip over safety
device turns the appliance o if it falls
over or is positioned inappropriately
in such a way as to jeopardise safety.
The appliance resumes operation
a few seconds after being placed
in an upright position again. See
troubleshooting session.
SAVE THESE
INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE
ONLY
DESCRIPTION
A Thermostat
B Function selector
C Indicator light
D
Tip over switch (certain models only)
E Foldable support
USE
Installation
The appliance can be used on any horizontal surface.
Do not overload the electrical circuit. Avoid using the same
socket for other appliances.
Electrical connection
- Before plugging into the outlet, make sure the voltage
of your power supply corresponds to the value V indica-
ted on the appliance and that the socket and power line
are appropriate for the load required.
- THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/
Loading ...